•       Water based paint    水基涂料
•       Contains silicates    含硅酸盐
•       Used in gas nitriding furnaces    用于气体氮化炉
•       Not suitable for molten salt or fluidized bed furnaces    不适合用于在熔盐浴或液化床炉子中
•       Designed for typical nitriding cycles  适用于典型渗氮周期
–      495 - 565oC
–      Minutes – Hours    几分钟 --- 几小时
•       The more severe the cycle, the closer our recommendations should be followed
       

        周期越是严密，越要严格遵守我们下面列出的建议事项
•       Properly mix     适当的混合
•       Parts should be clean and dry    零件必须干净干燥
•       Up to two coats are applied (0.010” – 0.020”)

  
        可以选择涂2层涂料（0.25毫米 --- 0.50毫米）
•       Air dry 10-30 minutes    空气中放置10-30分钟让涂层变干
•       After nitriding, coating residue may be removed with hot water
        氮化后，涂层残留物可以用热水清洗去除。